C Series Segment Head Casements
Casements | Elevation Charts
Segment Head Casements “X” Series Segm nt Head Casements - “X” Series 2'-6" 2'-6 1/2" F.S. R.O.
Segment Head Casements “C” Series
2'-8" 2'-8 1/2" 26 5/8" 25 7/8"
5'-4" 5'-4 1/2" 26 5/8" 25 7/8"
8'-0" 8'-0 1/2" 26 5/8" 25 7/8"
5'-0" 5'-0 1/2" 24 5/8" 23 7/8 "
7'-6" 7'-6 1/2" 24 5/8" 23 7/8 "
F.S.
R.O.
24 5/8" 23 7/8 "
G.S.*
G.S.*
G.S.**
G.S.**
5
9
13
C126-SEG
C226-SEG
C326-SEG
X326-SEG †
X126-SEG†
X226-SEG†
5
9
13
C13-SEG
C23-SEG
C33-SEG
X33-SEG
X13-SEG
X23-SEG
5
9
13
X136-SEG
X236-SEG
X336-SEG
C136-SEG
C236-SEG
C336-SEG
5
9
13
X34-SEG**
X14-SEG**
X24-SEG**
C14-SEG**
C24-SEG**
C34-SEG**
5
9
13
X146-SEG**
X346-SEG**
X246-SEG**
C146-SEG**
C246-SEG**
C346-SEG**
5
9
13
X15-SEG**
X25-SEG**
X35-SEG**
C15-SEG**
C25-SEG**
C35-SEG**
5
9
13
X256-SEG**
X356-SEG**
X156-SEG**
C156-SEG**
C256-SEG**
C356-SEG**
5
9
13
X26-SEG**
X36-SEG**
X16-SEG**
C16-SEG**
C26-SEG**
C36-SEG**
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved ** Glass size for push-out casements † Push-out units only available with single-point hardware F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. For push-out casements, have dealer specify push-out when placing order for unit. Divided lites are optional. Specify stationary, left or right venting when ordering single units. Venting is viewed from the exterior. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 36
Powered by FlippingBook