Segment Head Casements “E” Series Segment Head Casements - “E” Series 3'-0" 3'-0 1/2" F.S. R.O.
6'-0" 6'-0 1/2" 30 5/8" 29 7/8 "
9'-0" 9'-0 1/2" 30 5/8" 29 7/8 "
30 5/8" 29 7/8 "
G.S.*
G.S.**
5
10
14
E33-SEG §
E13-SEG
E23-SEG
5
10
14
E136-SEG***
E236-SEG***
E336-SEG***
5
10
14
E34-SEG***
E14-SEG***
E24-SEG***
5
10
14
E346-SEG***
E146-SEG***
E246-SEG***
5
10
14
E15-SEG***
E25-SEG***
E35-SEG***
5
10
14
E156-SEG***
E256-SEG***
E356-SEG***
5
10
14
E16-SEG***
E26-SEG***
E36-SEG***
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved ** Glass size for push-out casements *** Units meet most national escape and rescue requirements † Push-out units only available with single-point hardware § Only available as stationary units F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. For push-out casements, have dealer specify push-out when placing order for unit. Divided lites are optional. Specify stationary, left or right venting when ordering single units. Venting is viewed from the exterior. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 37
Powered by FlippingBook