Segment Head Casements “W” Series Segm nt Head Casements - “W” Series 2'-0" 2'-0 1/2" F.S. R.O.
Segment Head Casements “L” Series Segment Head Casements - “L” Series 2'-4" 2'-4 1/2" F.S. R.O.
4'-8" 4'-8 1/2" 22 5/8" 21 7/8 "
7'-0" 7'-0 1/2" 22 5/8" 21 7/8 "
4'-0" 4'-0 1/2" 18 5/8" 17 7/8 "
6'-0" 6'-0 1/2" 18 5/8" 17 7/8 "
22 5/8" 21 7/8 "
18 5/8" 17 7/8 "
G.S.*
G.S.*
G.S.**
G.S.**
4
4
7
7
10
11
W126-SEG†
W226-SEG†
W326-SEG†
L126-SEG†
L226-SEG†
L326-SEG†
4
7
4
7
10
11
W13-SEG
W23-SEG
W33-SEG
L13-SEG
L23-SEG
L33-SEG
4
4
7
7
10
11
W136-SEG W236-SEG
W336-SEG
L136-SEG
L236-SEG
L336-SEG
4
7
4
7
10
11
W14-SEG
W24-SEG
W34-SEG
L14-SEG
L24-SEG
L34-SEG
4
7
4
7
10
11
W146-SEG W246-SEG
W346-SEG
L146-SEG
L246-SEG
L346-SEG
4
4
7
7
11
10
W15-SEG
W25-SEG
W35-SEG
L15-SEG
L25-SEG
L35-SEG
4
7
4
7
11
10
W156-SEG W256-SEG
W356-SEG
L156-SEG L256-SEG
L356-SEG
4
7
4
7
11
10
W26-SEG
W16-SEG
W36-SEG
L6-SEG
L26-SEG
L36-SEG
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved ** Glass size for push-out casements † Push-out units only available with single-point hardware
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. For push-out casements, have dealer specify push-out when placing order for unit. Divided lites are optional. Specify stationary, left or right venting when ordering single units. Venting is viewed from the exterior. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 35
Powered by FlippingBook