Casements | Elevation Charts
Segment Head Casements “S” Series Segment Head Casements - “S” Series 1'-4" 1'-4 1/2" 10 5/8" 9 7/8" 2'-8" 2'-8 1/2" 10 5/8" 9 7/8" 4'-0" 4'-0 1/2" 10 5/8" 9 7/8" F.S. R.O. G.S.* F.S. R.O. G.S.*
Segment Head Casements “N” Series Segment Head Casements - “N” Series 1'-8" 1'-8 1/2"
3'-4" 3'-4 1/2" 14 5/8" 13 7/8 "
5'-0" 5'-0 1/2" 14 5/8" 13 7/8 "
14 5/8" 13 7/8 "
G.S.**
G.S.**
4
6
4
5
9
7
N126-SEG† N226-SEG†
N326-SEG†
S126-SEG† S226-SEG†
S326-SEG†
4
4
5
6
7
9
S13-SEG S23-SEG
S33-SEG
N13-SEG N23-SEG
N33-SEG
4
4
6
5
7
9
N136-SEG N236-SEG
N336-SEG
S136-SEG S236-SEG
S336-SEG
4
4
6
5
7
9
S34-SEG
N14-SEG N24-SEG
N34-SEG
S14-SEG S24-SEG
4
4
6
5
7
9
S346-SEG
N146-SEG N246-SEG
N346-SEG
S146-SEG S246-SEG
4
5
4
7
6
9
S35-SEG
N15-SEG N25-SEG
N35-SEG
S15-SEG S25-SEG
4
4
5
6
7
9
N156-SEG N256-SEG
N356-SEG
S156-SEG S256-SEG
S356-SEG
4
4
5
6
7
9
N16-SEG N26-SEG
N36-SEG
S16-SEG S26-SEG
S36-SEG
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved ** Glass size for push-out casements † Push-out units only available with single-point hardware
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Only flanker sash vent on 90° bay windows. Divided lites are optional. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 34
Powered by FlippingBook