Kolbe Ultra 2020

Segment Head Casements | Single Units Segment Head Casements - Single Units

2'-0" 2'-0 1/2" 18 5/8" 17 7/8 "

1'-4" 1'-4 1/2" 10 5/8" 9 7/8 "

2'-4" 2'-4 1/2" 22 5/8" 21 7/8 "

2'-6" 2'-6 1/2" 24 5/8" 23 7/8 "

2'-8" 2'-8 1/2" 26 5/8" 25 7/8 "

3'-0" 3'-0 1/2" 30 5/8" 29 7/8 "

1'-8" 1'-8 1/2" 14 5/8" 13 7/8 "

F.S.

R.O.

G.S.*

G.S.**

X126-SEG†

W126-SEG†

S126-SEG†

L126-SEG†

N126-SEG†

C126-SEG†

L13-SEG

X13-SEG

W13-SEG

N13-SEG

S13-SEG

C13-SEG

E13-SEG

S136-SEG

L136-SEG

W136-SEG

X136-SEG

N136-SEG

C136-SEG

E136-SEG***

N14-SEG

X14-SEG***

L14-SEG

W14-SEG

S14-SEG

C14-SEG***

E14-SEG***

X146-SEG***

W146-SEG

N146-SEG

L146-SEG

S146-SEG

C146-SEG***

E146-SEG***

N15-SEG

S15-SEG

L15-SEG

X15-SEG***

W15-SEG

C15-SEG***

E15-SEG***

L156-SEG

W156-SEG

X156-SEG***

N156-SEG

S156-SEG

C156-SEG***

E156-SEG***

W16-SEG

S16-SEG

X16-SEG***

L16-SEG

N16-SEG

C16-SEG***

E16-SEG***

* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved. ** Glass size for push-out casements.

*** Units meet most national escape and rescue requirements. † Push-out units only available with single-point hardware. F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size

NOTE: All measurements are nominal. Elevation charts are not to scale. For push-out casements, have dealer specify push-out when placing order for unit. Divided lites are optional. Specify stationary, left or right venting when ordering single units. Venting is viewed from the exterior. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .

Ultra Series 33