Kolbe Ultra 2020

Inswing Patio Doors | Elevation Charts

Inswing Patio Doors Inswing Patio Door

5'-11 7/16" 5'-11 15/16" 26 5/16"

3'-0 1/4" 3'-0 3/4" 26 5/16"

7'-4 5/8" 7'-5 1/8" 20 5/16"

4'-11 7/16" 4'-11 15/16" 20 5/16"

8'-10 5/8" 8'-11 1/8" 26 5/16"

2'-6 1/4" 2'-6 3/4" 20 5/16"

F.S.

R.O.

G.S.

ACT

STAT

ACT

STAT

ACT

STAT

3066

41166

51166

2666

81166

7566

ACT

STAT

ACT

STAT

ACT

STAT

ACT

3080

51180

7580

2680

41180

81180

Operation is viewed from the interior.

F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per panel)

Dimension Calculations

-113/16" -223/32" Width Height -29/16"÷2 -223/32" -35/16"÷3 -223/32" -13/4" -223/32"

F.S. to Panel O.S.M. (1-wide, active)

(1-wide, stationary)

(2-wide) (3-wide)

Panel O.S.M. to G.S.

-81/8"

-113/32"

G.S. to D.L.O. -1" Note : Clear opening dimensions can be found on pg. 227. -1"

F.S. = Frame Size • G.S. = Glass Size • O.S.M. = Outside Measurement D.L.O. = Daylight Opening • U.D. = Unit Dimension

NOTE: All measurements are nominal. Elevation charts are not to scale. When ordering single units, specify stationary, hinged left or hinged right. Divided lites are optional. The divided lite configuration shown for a single panel is typical for each panel in the unit. Additional swinging door sizes are available in the Entrance Door section.

Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .

Kolbe Windows & Doors 182