Inswing Patio Doors | French Doors Inswing Patio D r – Fr r
5'-11 7/16" 5'-11 15/16" 26 5/16"
5'-11 7/16" 5'-11 15/16" 26 5/16"
4'-11 7/16" 4'-11 15/16" 20 5/16"
4'-11 7/16" 4'-11 15/16" 20 5/16"
F.S.
R.O.
G.S.
ACT
ACT
ACT INACT
INACT
ACT
INACT
INACT
41166AL
41166AR
51166AL
51166AR
ACT
ACT
ACT INACT
INACT
ACT
INACT
INACT
51180AL
51180AR
41180AR
41180AL
Operation is viewed from the interior.
Inswing Patio Doors | Rectangular Transoms 5'-11 7/16" 5'-11 15/16" 65 15/16" Rectangular Transoms for Patio Door Sizes F.S. R.O. G.S. 2'-6 1/4" 2'-6 3/4" 24 3/4" 3'-0 1/4" 3'-0 3/4" 30 3/4" 4'-11 7/16" 4'-11 15/16" 53 15/16"
2610
3010
41110
51110
2614
3014
41114
51114
2616
3016
41116
51116
2618
3018
41118
51118
51120
2620
3020
41120
51126
2626
3026
41126
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per panel)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configuration shown for a single panel is typical for each panel in the unit. Additional swinging door sizes are available in the Entrance Door section. Rectangular transom units are sash set as standard. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 183
Powered by FlippingBook