Inswing Entrance Door Sidelites Ultra Inswing Ent. Door Sidlelites
Inswing Sidelite Sash Designs
Inswing Entrance Door Sidelite Panel Designs
1'-1 3/4" 1'-2 1/4" 7 3/4"
1'-3 3/4" 1'-4 1/4" 9 3/4"
1'-5 3/4" 1'-6 1/4" 11 3/4"
1'-7 3/4" 1'-8 1/4" 13 3/4"
F.S
R.O.
G.S.
UP7110 UP7110-30 UP7110-24
UP710 Sash Design#:
UP715 1W5H Pattern
1068S
1668S
1268S
1468S
Full Lite
1 Lite over 1 Panel, 8" Cross Rail at 40"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 30"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 24"
1070S
1270S
1470S
1670S
1080S
1280S
1480S
1680S
Inswing Entrance Doors | Rectangular Transoms Rectangular Transoms for Inswing Entrance Door Sizes
3'-1 5/8" 3'-2 1/8" 32 1/8"
2'-1 5/8" 2'-2 1/8" 20 1/8"
2'-7 5/8" 2'-8 1/8" 26 1/8"
2'-9 5/8" 2'-10 1/8" 28 1/8"
6'-2 3/16" 6'-2 11/16" 68 11/16"
5'-6 3/16" 5'-6 11/16" 60 11/16"
5'-2 3/16" 5'-2 11/16" 56 11/16"
4'-2 3/16" 4'-2 11/16" 44 11/16"
F.S.
R.O.
G.S.
2010
2610
2810
3010
4010
5010
5410
6010
2014
2614
2814
3014
4014
5014
5414
6014
2016
2616
2816
3016
4016
5016
5416
6016
2018
2618
2818
3018
4018
5018
5418
6018
2020
2620
2820
3020
4020
5020
5420
6020
2026
2626
2826
3026
4026
5026
5426
6026
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Rectangular transom units are sash set as standard. Adjustments may be required when stacking over other units; adjustments will be made in the factory.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 181
Powered by FlippingBook