7-PC
Particleboard Core 7-PC-CE Compatible edge
Type
Particleboard core (interior use).
In conformity with industry standards
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S.1-A-2004 ASTM D5456-09 ANSI A208.1
Thickness
1-3/8" (35 mm) – 1-3/4" (44 mm). 2" (51 mm) – 2-1/4" (57 mm).
Maximum size
7/16" (11 mm) wood (mill option) laminated to 1" (25 mm) structural composite lumber (SCL). 48'' x 120'' (1 219 mm x 3 048 mm). 1-7/16" (37 mm) structural composite lumber (SCL). Particleboard core with a density of 28-32 PCF (449-513 kg/m³ ) LD-1, bonded to the stiles and rails. Type I (waterproof); PVA (no urea formaldehyde); VOC<0.683 g/L. LD-2 core. [Door 1-3/4"- (44 mm)] 20 minute rating neutral or positive pressure. Refer to Fire Door Section of our website for details. 15/16" (24 mm) wood (mill option) laminated to 1" (25 mm) structural composite lumber (SCL). Bifold. Hardboard. Wood louvers not permitted in 20 minute labeled doors. Cut-out must not exceed 40% of door area. Minimum 5" (127 mm) from stiles or rails. Minimum 1-1/2" (38 mm) from cut-out to cut-out. Refer to Option Section of our website for details. Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Stiles
Core Rails
Adhesive
Face
Options
Lite and louver openings
1 2 3 4
5
6 7
Notes
Warranty
Life of original installation. See our complete warranty for details.
MEMBER
C
US
k
Factory Finish
UV Finishing System. White primer available. Seal top and bottom standard. No VOC . Recycled content (LEED MRc4.1, 4.2) .
Environmental Description
Printed in Canada 2010/12
Powered by FlippingBook