Exterior Colors & Finishes Kolbe’s Heritage Series all-wood products can be coated with K-Kron II – a durable exterior finish that enhances and preserves the look of wood windows and doors. Kolbe’s Ultra Series and VistaLuxe WD LINE clad products are finished on the exterior with a commercial-grade 70% PVDF fluoropolymer coating that meets the highest specifications in the industry and carries up to a 30-year warranty. A variety of colors, mica and anodized finishes, plus custom colors are available. Select colors are available for VistaLuxe AL LINE and Forgent Series interiors and exteriors. See your Kolbe dealer for details.
Ultra Pure White **
White
Cloud *
Alabaster
Abalone
Camel
Natural Cotton
Khaki
Sahara *
Mudpie
Nutmeg
Beige
Spiced Vinegar
Gingersnap
Truffle
Bronze * †
Rustic
Shadow
Smokestack
Shale
Timberwolf
Onyx ** †
Coal Black †
Midnight * †
Slate
Castlerock
Steel Gray **
Corbeau †
Sapphire
Coastal Storm
Mediterranean
Lunar
Emerald Isle
Anchor Gray
Copper Canyon
Green Tea Leaf
Hartford Green
Cider
Mystic Ivy
Maize
Basil
Custom Colors Available
Clear Anodized **
Champagne Anodized
Roma
Chutney
Papaya
Black Anodized
Dark Bronze Anodized **
Night Sky Mica
Galaxy Silver Mica
Cosmic Gray Mica
Silverstorm Mica
NOTE: *Forgent Series products are available in Cloud, Sahara, Bronze or Midnight. **VistaLuxe AL LINE products are available in Ultra Pure White, Onyx, Steel Gray, Signal Black (not shown), Clear Anodized and Dark Bronze Anodized interior and exterior finishes. †Bronze, Onyx, Coal Black, Midnight, and Corbeau are not available for Heritage Series products. Some options for our products may have limited color offerings or may incur a nominal charge. Check with your Kolbe dealer for further details on pricing and availability. Printed images of exterior finishes may vary slightly from actual colors. Selections should be made based on actual color samples available from your Kolbe dealer. There is a “color range” with anodized colors. That is, there is an acceptable “light” to “dark” color range that can be experienced on any job. According to AAMA 611-98 specifications, Section 8.3, the range may be up to 5 Delta E’s. We can provide from our anodized vendor color samples of this color range if requested. The color range is due to numerous variables which include (but are not limited to) the shape of the parts, alloy variations and time in the anodizing process. This could mean that a sash part may appear slightly different in color than a frame part. This is/will be acceptable. Even the samples that may be provided may vary from the final product due to the variables. You must be aware of this as this will be considered acceptable.
Powered by FlippingBook