HBG Full Line Catalog

Pro Tips 4 When ordering a decorative capital order the appropriate base for the column. 4 Decorative capitals for square PermaCast®Plus slide over the shaft and do not use a plug. These decorative capitals will not add or subtract from the overall height. 4 When installing a decorative capital on fluted, recessed panel, or square columns, the capital slides over the shaft. The taller capitals will cover the flutes and require additional caulking to finish. 4 Verify exact opening measurement prior to ordering column length. 4 When installing a PermaCast®Plus column, verify concentric loading of column. 100% of bottom must contact substrate and 75% of top must contact soffit. 4 When attaching handrails or corner iron to PermaCast®Plus columns, holes must be pre-drilled before applying screws. 4 Split columns are left partially intact. Cut with masonry or carbide- tipped blade. 4 All custom split columns, adjusted flutes, caps, and bases are nonrefundable.

Decorative Capitals for ROUND Tapered PermaCast®Plus Columns Adding a load bearing decorative capital to a round

CAPITAL

COLUMN SHAFT CAPITAL PermaCast®Plus column will lengthen or shorten the overall height of the column depending on the height of the capital. Subtract the "T" dimension (from the column dimensions chart) and add the height of the decorative capital +/- 1/4" for overall column height. PLUG NECK MOULD COLUMN SHAFT

ECK OULD

CAPITAL PLATE

SECTION WITH ORNAMEN TAL CAPITAL

SECTION WITH LOAD BEARING ORNAMEN TAL CAPITAL

8"-12" Load Bearing Capital

Neck Mould

Capital Column Shaft

Capital Plate

14"- 30" Non Load Bearing Capital with Separate Load bearing Plug

Neck Mould

Capital Column Shaft

NOTE: Decorative Capitals are not designed to fit non-tapered columns.

Capital Plug

Decorative Capitals for SQUARE PermaCast®Plus Columns Adding a decorative capital to a square PermaCast®Plus column

Neck Mould

Capital Column

DOES NOT change the length of the column shaft. The decorative capital simply slides over the shaft. Neck moulding can be applied or not.

Shaft Capital Plug

17

Powered by