Double Hungs | Elevation Charts
Double Hungs | Rectangular Transoms 1'-9 1/2" 1'-10" 1'-8" 16" 2'-1 1/2" 2'-2" 2'-0" 20" 3'-1 1/2" 3'-2" 3'-0" 32" 2'-5 1/2" 2'-6" 2'-4" 24" 2'-9 1/2" 2'-10" 2'-8" 28" 3'-5 1/2" 3'-6" 3'-4" 36" F.S. R.O. S.O. G.S. Rectang lar Transoms
3'-9 1/2" 3'-10" 3'-8" 40"
T3606
T4006
T2806
T2006
T2406
T3206
T1606
T4010
T2010
T3610
T2410
T3210
T1610
T2810
T2412
T3212
T1612
T2812
T2012
T3612
T4012
T2414
T3214
T1614
T2814
T2014
T3614
T4014
T2818
T2018
T3618
T4018
T2418
T3218
T1618
T1624
T2824
T2024
T3624
T4024
T2424
T3224
F.S. = Frame Size • R.O. = Rough Opening • S.O. = Sash Opening • G.S. = Glass Size
NOTE: All measurements are nominal. These dimensions apply only for transoms with flat sills. Contact your supplier for dimensions of units with beveled sills. Elevation charts are not to scale. Divided lites are optional. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Transom units are only available with a 1-3/4" sash. Specify roll-formed or extruded aluminum sash when ordering. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. The side jambs of double hung units extend above the head jamb; additional space for the rough opening height may be necessary. For pocket double hung transoms, talk to your local Kolbe dealer. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 82
Powered by FlippingBook