Awnings | Elevation Charts
Awning Crank-out Single Mull Unit Combinations 1-8 wide
Awnings | Single Units Awnings – Single Units
Awning Units & Mull Configurations 1'8" Widths
1'-8" 1'-8 1/2" 14 5/8" 13 7/8"
2'-0" 2'-0 1/2" 18 5/8" 17 7/8"
3'-0" 3'-0 1/2" 30 5/8" 29 7/8"
F.S.
2'-4" 2'-4 1/2" 22 5/8" 21 7/8"
2'-6" 2'-6 1/2" 24 5/8" 23 7/8"
4'-0" 4'-0 1/2" 42 5/8" 41 7/8"
2'-8" 2'-8 1/2" 26 5/8" 25 7/8"
3'-6" 3'-6 1/2" 36 5/8" 35 7/8"
R.O.
5'-0" 5'-0 1/2" 14 5/8" 13 7/8"
3'-4" 3'-4 1/2" 14 5/8" 13 7/8"
F.S.
1'-8" 1'-8 1/2" 14 5/8" 13 7/8"
G.S.
R.O.
G.S.*
G.S.
G.S.*
1818
2018
2418
2618
2818
3018
3618
4018
18141
18142
18143
1820
2020
2420
2620
3020
2820
3620
4020
181412
181422
181432
1826
2026
3026
2426
2626
3626
2826
4026
1830
2030
4030
2430
2630
2830
3630
3030
181413
181423
181433
Awnings | Single Picture Units Awnings – Single Picture Units
2'-0" 2'-0 1/2" 18 5/8" 17 7/8"
3'-0" 3'-0 1/2" 30 5/8" 29 7/8"
2'-6" 2'-6 1/2" 24 5/8" 23 7/8"
3'-6" 3'-6 1/2" 36 5/8" 35 7/8"
4'-0" 4'-0 1/2" 42 5/8" 41 7/8"
2'-8" 2'-8 1/2" 26 5/8" 25 7/8"
F.S.
18161
18162
18163
R.O.
G.S.
G.S.*
181612
181622
181632
4040
2040
2640
3640
3040
2840
181613
181623
181633
4050
2050
2650
3650
3050
2850
18181
18182
18183
2060
2660
4060
3060
3660
2860
181812
181822
181832
181813
181823
181833
2066
2666
4066
3066
3666
2866
Dimension Calculations
-1 15/16" -1 15/16" -2 13/16" -2 13/16" Width Height
F.S. to Sash O.S.M. Sash O.S.M. to G.S.
2070
2670
4070
3070
3670
2870
G.S. to D.L.O.
-1"
-1"
G.S. to Screen O.S.M. U.D to G.S. (for push-outs)
+1-9/16" +1/2" -8 11/16" -8 3/16"
* Glass size for push-out awnings F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size
F.S. = Frame Size • G.S. = Glass Size • O.S.M. = Outside Measurement D.L.O. = Daylight Opening • U.D. = Unit Dimension
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 54
Powered by FlippingBook