Casements | “N” Series 30 º Bay Windows “N” Serie 30° Bay Windows
12 13/32"
UNIT PROJECTION:
6'-6 39/64" 6'-5 3/64" 14 5/8" | 36 5/8" | 14 5/8"
8'-2 39/64" 8'-1 3/64" 14 5/8"
4'-10 39/64" 4'-9 3/64" 14 5/8"
8'-2 39/64" 8'-1 3/64" 14 5/8" | 54 5/8" | 14 5/8"
6'-6 39/64" 6'-5 3/64" 14 5/8"
U.D.
R.O.
G.S.
30-N13-33P-13
30-N13-13-13
30-N13-23-13
30-N13-33-13
30-N13-23P-13
30-N136-336P-136
30-N136-136-136
30-N136-236-136
30-N136-336-136
30-N136-236P-136
30-N14-34P-14
30-N14-24-14
30-N14-14-14
30-N14-24P-14
30-N14-34-14
30-N146-146-146
30-N146-246-146
30-N146-246P-146
30-N146-346-146
30-N146-346P-146
30-N15-15-15
30-N15-25-15
30-N15-25P-15
30-N15-35-15
30-N15-35P-15
30-N156-156-156
30-N156-256P-156
30-N156-356P-156
30-N156-256-156
30-N156-356-156
30-N16-36P-16
30-N16-16-16
30-N16-26-16
30-N16-26P-16
30-N16-36-16
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/16" to the rough opening height if an insulated platform is being used. Rough openings for bay units without head and seat boards, typically used for walk-out applications, are different. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 29
Powered by FlippingBook