Outswing Entrance Door Sidelites Ultra Outswing Sidlelites
Outswing Entrance Door Sidelite Panel Designs
Inswing Sidelite Sash Designs
1'-2 1/4" 1'-2 3/4" 7 5/8"
1'-4 1/4" 1'-4 3/4" 9 5/8"
1'-6 1/4" 1'-6 3/4" 11 5/8"
1'-8 1/4" 1'-8 3/4" 13 5/8"
F.S
R.O.
G.S.
UP7110 UP7110-30 UP7110-24
UP710 Sash Design#:
UP715 1W5H Pattern
1068
1268
1468
1668
Full Lite
1 Lite over 1 Panel, 8" Cross Rail at 40"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 30"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 24"
1070
1270
1470
1670
1080
1280
1480
1680
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. * Glass size widths are shown for one-lite glass. Not all panel designs are available in all sizes. Not all panel designs are shown; see your local Kolbe distributor for further assistance. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 189
Powered by FlippingBook