Casements | Elevation Charts
Casements | “N” Series (1'8" wide)
* Glass size for push-out casements † Push-out units are only available with single-point hardware †† Unit heights are only available for crank-out casements F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Above sizes are available as crank-out and push-out casements. For push-out casements, have dealer specify push-out when placing order for unit. Divided lites are optional. Specify stationary, left or right venting when ordering single units. Venting is viewed from the exterior. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 16
Powered by FlippingBook