Half-Circle Units | 1-Wide Outswing Entrance Doors ULTRA SINGLE DOORS
(for active door)
(for active door)
(for active door)
(for active door)
2'-6 27/32" 2'-7 11/32" 24 7/32"
2'-8 7/32" 2'-8 23/32" 25 19/32"
2'-10 7/32" 2'-10 23/32" 27 19/32"
2'-2 7/32" 2'-2 23/32" 19 19/32"
F.S.
F.S.
F.S.
F.S.
R.O.
R.O.
R.O.
R.O.
G.S.
G.S.
G.S.
G.S.
RTXD20
RTS26*
RTXD26
RTXD28
(for stationary door)
(for stationary door)
(for stationary door)
(for stationary door)
(for active door)
(for active door)
3'-0 27/32" 3'-1 11/32" 30 7/32"
3'-2 7/32" 3'-2 23/32" 31 19/32"
F.S.
F.S.
R.O.
R.O.
G.S.
G.S.
RTXD30
RTS30*
(for stationary door)
(for stationary door)
Half-Circle Units | 2-Wide Outswing Entrance Doors
4'-2 7/8" 4'-3 3/8" 44 1/4" lf- ircles to Match Outswing Doors (for Two Wide) 5'-0 1/8" 5'-0 5/8" 53 1/2" F.S. R.O. G.S. 5'-2 7/8" 5'-3 3/8" 56 1/4" F.S. R.O. G.S. 5'-6 7/8" 5'-7 3/8" 60 1/4" F.S. R.O. G.S. F.S. R.O.
6'-0 1/8" 6'-0 5/8" 65 1/2"
6'-2 7/8" 6'-3 3/8" 68 1/4"
F.S.
F.S.
R.O.
R.O.
G.S.
G.S.
G.S.
RTXD40
RTS411
RTXD50
RTS511
RTXD60
RTXD54
F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Radius units are sash set as standard. Direct set units are available but glass sizes differ from chart shown. Contact your supplier for details. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Divided lites are optional. Divide lite pattern options are shown on pg. 126. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 216. Additional and the most current drawings are available at www.kolbewindows.com .
Ultra Series 129
Powered by FlippingBook